Frequently Asked Questions

What grade is Aluminium tooling plate?

Aluminium tooling plate is a type of rolled aluminium that is produced specifically for use in the manufacture of tools. It is generally used where a high level of accuracy and precision is required, such as in the production of jigs and fixtures. The material can be worked to close tolerances and has good surface finish properties, making it ideal for use in applications where aesthetics are important.

Aluminium tooling plate is available in a range of grades, each with different properties that make them suitable for different applications. The most common grade used for tooling applications is 6061-T6; however, other grades such as 7075-T6 may also be used depending on the specific requirements.

Is 6061 aluminum good for machining?

If you're looking for a versatile aluminum alloy for machining purposes, then 6061 aluminum is a good place to start. Comprised of magnesium and silicon, as well as small amounts of iron, copper, manganese, zinc and titanium, this heat-treatable alloy has good weldability and corrosion resistance properties. In terms of machinability, 6061 aluminum is generally considered to be good – although not on par with the likes of free-machining aluminum alloys such as 2011 or 2017.

When working with this material, it's important to use sharp tools and employ both positive and negative rake angles; taking light cuts will also help to avoid tool breakage.

How strong is 6061 aluminum plate?

6061 aluminum is one of the most widely used grades of aluminum. It is a precipitation-hardened aluminum alloy that contains magnesium and silicon as its major alloying elements. It has good mechanical properties, exhibits good weldability, and is heat treatable.

As such, it is widely used in aerospace, automotive, and other applications where strength, corrosion resistance, and weldability are important. So how strong is 6061 aluminum plate? In general, aluminum alloys tend to have lower strengths than steels but higher strengths than pure copper or zinc.

6061 aluminum falls into this category – it has a tensile strength of 276 MPa (40 ksi) and a yield strength of 95 MPa (14 ksi). This puts it on par with many types of steel in terms of strength. However, keep in mind that these values refer to the ultimate strengths of the material – meaning the stress at which the material will fail catastrophically.

The yield strength – or the stress at which permanent deformation occurs – is usually about 0.2% or less of the ultimate strength for most metals (including aluminum). So while 6061 aluminum may have comparable ultimate strengths to some steels, its yield strength will be significantly lower. This means that it will deform more easily under loads that are below its catastrophic failure point.

What is the difference between 6061 and 6061-T6 aluminum?

There are a few key differences between 6061 and 6061-T6 aluminum. The main difference is that 6061 is heat-treated while 6061-T6 is not. This means that 6061-T6 will be stronger and more durable than 6061.

However, it also means that 6061-T6 will be more difficult to work with. Another difference is that 6061 has a lower melting point than 6061-T6. This means that it can be easier to weld and braze6061 aluminum.

Finally,6061 aluminum is more susceptible to corrosion than6061-T6 aluminum.